UPC Densifier

Product Description

UPC Densifier is a lithium-fortified, single-component, deep-penetrating concrete treatment that provides for a significantly harder surface and extends the life of the concrete floor. Its design features provide higher stability and durability of the concrete substrate, reducing the cost of maintenance. This product is designed to be used during the grinding and polishing process without leaving residue or contributing to efflorescence in the concrete. UPC Densifier is user friendly, allowing the treated substrate to be ground or polished.


  • High reflectivity
  • Penetrates and seals
  • Improves chemical resistance
  • Easy to use
  • VOC compliant
  • Interior / Exterior use
  • Increases durability
  • Reduces alkalinity
  • Superior clarity
  • Improves water resistance
  • Non-whitening
  • Easy to maintain


The uniqueness of its chemistry allows UPC Densifier to be used in many applications, including the following:

  • Concrete Floors
  • Terrazzo Floors
  • Self-leveling Cementations Toppings
  • Micro-Topping
  • Decorative Concrete


UPC Densifier is available in the following packaging:

  • 1 Gallon Unit
  • 5 Gallon Unit
  • 55 Gallon Drum


Use water to clean tools and equipment. UPC Densifier is environmentally friendly, and does not require hazardous disposal methods.


It is recommended that a sample area should be done before the start of the project. The test should be done on-site, using the proposed method by the assigned applicator to ensure desired finish.

Product Data

Coverage: 400-500 SF/gal (100-200 grit profiles)
*Will vary depending on the porosity of the surface.
Cure Time: 20-30 minutes
Shelf Life: 2 Years
Colors: UPC Densifier is available in Clear only.
Mixing: Shake or stir thoroughly before applying.

Application Instructions

To allow for deeper penetration into concrete substrate, grind the floor to a 100-200 grit surface profile. Depending on the size of the work area, this product can be applied with a pump sprayer or a high volume, low-pressure sprayer.

  • Apply UPC Densifier to the surface evenly at approximately 400-500 SF/gallon.
  • Lightly broom out any puddles immediately.
  • Allow the material to remain on the surface for 20-30 minutes.
  • Do not let any area dry out during this time. Add more UPC Densifier if needed to keep a uniform wet surface.
  • After the material has penetrated, and is no longer glistening on the surface, continue grinding and polishing to the desired finish. If using a wet polishing method, or on integrally colored concrete, we recommend using an auto scrubber and water to remove residual slurry between abrasive disc grits.


Recommended maintenance includes regular sweeping and mopping of the treated surface. Washing and mechanical scrubbing with neutral pH cleaners/water is also recommended. DO NOT USE acidic, citrus or cleaners that contain butoxy-ethanol on the treated floor.


Consult UPC Densifier safety data sheet. Some individuals may be allergic to this product. Use of safety goggles, protective gloves and clothing when using this product is recommended.